Manicures and pedicures aren’t only for humans; dogs want to be pampered as well, and you can do it yourself at home.
All dogs’ nails should be clipped on a regular basis. Long nails have a tendency to break, resulting in a split toenail.
Other problems that can occur if your dog’s nails grow too long include difficulty walking and maintaining traction on the floor, and in severe situations, the nail can grow into the skin on the paw pad, causing pain and infection.
That’s why, if you’re going to clip your dog’s nails yourself, it’s critical to know how to do it correctly and safely.
Here’s how to give your dog the proper pedicure.
Cutting Dog Nails with Scissors?
Trim nails are one clear evidence of your dog’s good health and hygiene, and they are an important aspect of dog grooming using nails.
You’ll obtain better outcomes if you use the correct tool for the job.
That’s why you should never use scissors to clip a dog’s nails.
They’re the incorrect equipment for the job. In this article, you will find the best tools to use to cut your dog’s nails.
Nervous owners can hire a professional groomer to do the job, but dog nail trimming is a straightforward technique if done correctly.
Should You Cut Your Dog’s Nails Using Scissors?
No. This is something you should never do.
It has the potential to harm and destroy their nails.
Instead, use nail clipper or a Dremel; you may also use an emery board to file a dog’s nails.
If you’re concerned about cutting into the quick, a Dremel might be a better option.
If you’re a master samurai nail cutter, however, guillotine clippers might be the finest option.
Whatever method you use, you must exercise caution, and your dog’s reaction to nail trimming is a good clue.
This is something I cannot emphasize enough.
Make it a comfortable and enjoyable experience for them, and they will be less bothered.
Reasons Why You Should Not Use Scissors:
- Dog nails are thicker, stronger, and more rounded than human nails.
- Normal scissors may exert too much pressure on the nail without cutting it, leading it to be crushed, broken, or splintered all the way down to the quick.
- If this happens, you’ll have a new problem on your hands, one that may necessitate a costly trip to the veterinarian.
- As a result, you must either visit a pet store or place an order for a pair online.
How to Cut Dog Nails Quickly and Effortlessly [ 2 Methods]
There are various options available to you. Grab the dog nail clippers, sit down on the floor, and yank up a paw to begin clipping.
Chop, chop, and chop some more. If you do this, he’ll run away the next time you pick up the clippers, so don’t do it
Instead, here are a couple alternatives that are more effective.
Method 1 – The Calming, Gentle Approach
- Take a seat near your dog and softly rub him. With a calm voice, not a tense one, reassure him that everything is well.
- Place the nail clippers in front of him on the ground. He’ll give them a sniff and then lose interest, if he’s like most dogs. (You’ve just just introduced him to the object.)
- Provide a tiny treat while chatting reassuringly, and then begin trimming the nails softly.
Method 2 – Does Anyone Want to Be Treated?
- Dog owner should train their dog’s to lay down in front of the kibble dispenser.
- He will patiently wait for the kibble to come out once he realizes it will come out in single bites.
- Pick up one paw and hold it firmly in your hand.
- Spread your toes out so you can see the nail clearly.
- Make sure to look for the fast. We don’t want to jeopardize that.
- Wait for the machine to provide a treat, then trim the nail once the dog has received it and has settled back down.
- Make sure you don’t clip it before you feed it the kibble.
- When you cut using nail trimmer, we don’t want him to jerk out of your hands.
How to Use Clippers to Trim Dog Nails at Home?
Let’s speak about the actual cutting process now that we know how to divert your dog’s attention or comfort him into allowing you to trim his nails.
- If your dog’s paw are shaggy, trimming the hair surrounding the paw can help you see the nail more clearly.
- Hold the paw tightly after removing any undesirable hair.
- Pick up a paw slowly and carefully. If he pulls it away, try again, offering encouraging words and gradually spreading the toes apart.
- If there is any hair around the dog nail that is obstructing your view of the nail, clip it to make it easier to see.
- Look for the quick.
- White dog’s nail will have a pink or crimson center that will be visible from the outside.
- Because a quick is not apparent from the exterior on dogs with black or chocolate nails, you’ll have to find out after you clip the tip of the nail off.
- Begin by snipping the very tip of the dog’s nail using the guillotine or clippers.
- Take a look at the remaining dog’s toenail now. Is there any pink or black underneath the white? If it’s the case, that’s the pulp that comes before the quick. From the cut you just made, there should be a lot of white there as well.
- Re-insert a small portion of the nail into the device and squeeze just a little for nail trim. The quick is if it seems spongy or mushy, or if your dog tries to jerk his paw away. If that’s not the case, go ahead and snip it.
- Look at the nail. The nail will most likely have more pink or black in it, surrounded by a lot of white. If that’s the case, you can probably take a little more off. But only a smidgeon.
- You’ll reach a point where you’ll see a pink or entirely black core with a little white circle surrounding it. If you continue, you will pass through the pulp and cut into the quick.
- After trimming all of the nails, it’s a good idea to file them down smoothly to avoid snagging them on anything.
How to Use a Dremel to Cut Dog Nails
Using a Dremel or dog nail grinder to cut nails is a much safer and faster option than filing them down by hand.
Do not leave the Dremel on the nail for an extended period of time.
It could get hot, which would be uncomfortable for your dog, so pull the Dremel off the bottom of the nail and start over after a few seconds.
- When compared to clippers, you have greater control.
- They won’t be able to sever the quick like cutters can.
- They’re excellent for rounding off nails so they don’t catch on things or harm the floor.
- Dogs dislike them because they are noisy and vibrate.
- Clippers are less expensive than these.
- The Dremel will take longer if you’re a samurai clipper.
- They become really heated. As a result, it’s critical to move them away every few seconds.
- Now that you’ve discovered the dewclaw, lightly touch the nail with the tip of the Dremel and let it to grind some of the nail down, but not too much.
- Once you’ve worn down some of the nail, make sure to finish the sides as well so you can finish with a nice smooth nail all the way around the tip.
- Pick up another paw, separate the toes, and do the same thing with the other toes.
Leaving Your Dog’s Nails Uncut
It’s more than just a matter of appearance when you keep your nails in good shape.
In some cases, unhealthy nails can cause pain and, in rare cases, irreversible damage to the dog.
The live pink quick and the hard exterior layer known as the shell make up a dog’s nail.
The quick is a blood vessel that runs through the center of the nail, supplying it with oxygen and nutrients.
When the quick is sliced, the nerves induce bleeding and agony.
The quick will recede from the end of the nail with regular nail trimming.
Short quicks are the best choice for the dog’s comfort and ease of care.
Long nails can cause deformed feet and tendons injury over time, turning a healthy paw into a splayed foot and reducing traction.
They can also cause deformed feet and tendons injury.
The pressure exerted by the long nail as it strikes the ground exerts force on the foot and leg anatomy.
Some dogs don’t need to get their nails cut as often since they wear down.
What to do if my dog’s nail has started to bleed?
Stay calm if you end up cutting into your dog’s quick using dog nail clipper.
To dip the nail in styptic powder, you’ll need to have some on hand.
Dipping the individual nail in styptic powder not only coagulates the blood and stops the flow, but it also aids in the formation of a clog at the bottom of the vessel, preventing bacteria from entering.
If your pet’s nails has been severed and is bleeding profusely, contact your veterinarian for assistance.
Nail clippers, guillotine clippers, or a grinder are needed to cut your dog’s nails.
It’s preferable to have two individuals for first-timers: one to reassure your dog while the other trims.
Another approach is to use nail grinder , which may give you more control.
Hand filing with a traditional emery board or using a scratch board are by far the best options for trimming your dog’s nails without clippers.
Grinders can also work, but you need to acclimate your dog early on to these.
Never use scissors and only use human clippers on small puppies who have tiny nails.
Only the tip of the nail should be clipped straight across.
Include the dewclaws, which are placed on the paw’s inner side.
If you clip past the bend of the nail, you run the danger of hitting the quick (the pink area of the nail that contains the blood vessels).